Carbon Foam

Production and Usage

Carbon foam is made using different processes where the material is formed into a porous structure. The method can vary depending on the required size and structure. It is supplied in block or sheet form and can be cut or shaped as needed before use.

It is mainly used in setups where airflow or liquid flow is needed, like filtration or heat related systems. It is also used where high temperature handling is required. It is generally used as a part inside a system, not on its own, and fitted as per requirement.

How to Use Carbon Foam

Carbon foam is cut to size and fitted where flow or heat handling is required. Because it is lightweight and can handle high temperature, it is often used in heat related setups and filtration units.

It is placed in such a way that air or liquid can pass through easily. It is usually fixed inside the system using simple support depending on the setup.

Safety Instructions

• Handle properly while cutting or fitting
• Use basic gloves to avoid direct contact
• Avoid breathing dust while cutting or shaping
• Keep away from direct flame during storage
• Store in a dry place to avoid damage
• Make sure proper ventilation is there during use in closed systems
• Follow normal safety practice while installing

Features of Carbon Foam

• Light in weight, easy to handle
• Has small holes, so air or liquid can pass through
• Can take heat, does not get damaged easily
• Useful in heat and flow related work
• Can be cut or shaped as needed
• Does not add much weight to the setup
• Can be used in different places without much issue

Applications of Carbon Foam

• Used in filtration where air or liquid needs to pass
• Used in heat related setups
• Used in heat exchangers
• Used in systems where lightweight material is needed
• Used in flow setups where material should not block passage
• Used in some industrial setups where high temperature is involved
• Used in custom setups depending on requirement

Advantages

• Light in weight, easy to handle
• Can handle heat better than many materialss
• Allows air and liquid to pass through easily
• Does not add much load to the setup
• Can be used in different setups without much change
• Easy to cut and fit as needed
• Works in places where normal materials may not last long

Global Export of Carbon Foam

We are supplier and exporter of carbon foam to different countries based on requirement. A good part of our orders comes from the Middle East like UAE, Saudi Arabia, Qatar and Oman. We also supply to African countries such as South Africa, Kenya and Nigeria.

In Europe, we deal with customers from Germany, UK, France and nearby regions. We also get enquiries from Asian countries like Japan, South Korea, Thailand and Bangladesh. Apart from this, we have supplied to the US, Canada and Australia as well.

We handle both small and bulk orders. Custom sizes can be arranged and export packing is done properly so material reaches without issue.

Why Choose Ambani Metals for Carbon Foam?

Ambani Metals supplies carbon foam as per requirement, mainly for heat related and filtration use where proper pore structure and thickness matter. We handle both small and bulk orders, and custom sizes can be arranged depending on the setup. If you are not sure about the right specification, you can share your requirement and we will suggest a suitable option. We also manage packing and dispatch properly for regular and export orders so the material reaches in good condition. For carbon foam requirement, you can contact us and we will share details and quotation accordingly.

Porous Carbon Foam Sheet for Gas Diffusion Layer

We are manufacturer and supplier of porous carbon foam sheet for gas diffusion layer where proper gas flow is required. The material has a porous structure, so gas can pass through easily.

It is mainly used in fuel cell setups and similar applications where even gas flow is needed. It helps in maintaining proper flow inside the system. Carbon foam can handle heat and is easy to fit. It can be cut or shaped as per requirement.

We supply carbon foam in different thickness and sizes. Bulk quantity is available and export orders are also handled.

Porous Carbon Fiber Foam Battery Material

We supply porous carbon fiber foam for battery applications in custom sizes and thickness as per requirement. This material is used where proper structure and flow are needed inside the setup.

If you are working on battery projects or testing, this material can be supplied in small or bulk quantity. It is easy to cut and fit, so it can be used directly without much processing.

We regularly handle custom orders, so you can share your required size, thickness and quantity. Based on that, we will suggest suitable material and quote accordingly.

For porous carbon fiber foam requirement, you can contact us directly with your details and we will respond with pricing and availability.

Ultramet Carbon Foam Sheet (0.5–3mm Thickness)

We supply Ultramet type carbon foam sheets in 0.5mm to 3mm thickness as per requirement. This material is used where thin and lightweight porous sheet is needed for flow or heat related work.

Because of its structure, air or gas can pass through easily, so it is used in setups where proper flow is important. Thin thickness makes it suitable for compact applications where space is limited.

If you are looking for carbon foam sheet in 0.5–3mm thickness, you can share your requirement and we will quote accordingly.

Custom Shape Carbon Foam for Battery Applications

Carbon foam in custom shape is supplied for battery setups where exact fitting is required. Instead of standard sheets, shapes can be made as per drawing or sample, so it goes directly into the setup without extra cutting.

The material has a porous structure, which helps in proper working inside the system. It is light in weight and easy to handle, so it can be used in different types of battery applications.

If you need custom shape carbon foam for battery use, you can share your drawing or requirement and we will check and quote accordingly.

Carbon Foam Battery Material with 0.01–6mm Aperture

Carbon foam with 0.01–6mm aperture is used in battery setups where flow control inside the material matters. Smaller aperture is used where tighter structure is needed, while larger aperture is preferred when more movement is required. Selection usually depends on how the setup is designed.

This material is mostly taken for projects where standard sheets don’t work and specific aperture is required. It can be cut or adjusted based on size and fitted directly into the setup without much extra work.

We handle requirements where buyers need particular aperture range along with size and thickness. Small quantity can be arranged for testing, and bulk supply is also available for regular use.

Technical Indicators

• Density: 0.2 – 1.0 g/cm³
• Porosity: 30% – 80%
• Aperture: 0.01 – 6 mm
• Compressive Strength: 8 – 12 MPa
• Compression Modulus: 300 – 620 MPa
• Tensile Strength: 2 – 5 MPa
• Tensile Modulus: 300 – 500 MPa
• Thermal Expansion: around 5.0 ppm/°C
• Thermal Conductivity: 25 – 80 W/m·K
• Resistivity: 1.0 × 10?² to 10?? ?·m
• Max Operating Temperature: Around 600°C in air, Up to 3000°C in inert gas

Dimensions

• 0.5mm × 100mm × 100mm
• 0.6mm × 100mm × 100mm
• 0.7mm × 100mm × 100mm
• 0.8mm × 100mm × 100mm
• 0.9mm × 100mm × 100mm
• 1.0mm × 100mm × 100mm
• 1.2mm × 100mm × 100mm
• 1.5mm × 100mm × 100mm
• 2.0mm × 100mm × 100mm
• 2.5mm × 100mm × 100mm
• 3.0mm × 100mm × 100mm

It can be made as per requirement