Tubes & Pipes

Specification Chart of Tubes & Pipes
CHEMICAL COMPOSITION
CS :- Carbon Steel
Mechanical Properties
Tensile Strength Yield stress Elongation In
Specification WT Type C% Mn% MAX  
P% MI
S% Si% Mpa Mpa 50mm MIN Longitudinal
ASTM A179 M/W CS

0.06-0.18

0.27-0.63 0.048 0.058 -- -- -- --
ASTM A192 M/W CS 0.06-0.18 0.27-0.63 0.048 0.058 0.25 MAX -- -- --
ASTM A210/ A1 M/W CS 0.27 MAX 0.93 MAX 0.048 0.058 0.10 MAX 312 MAX 255 MIN 30
DIN/17175/ST35.8 A/W CS 0.17 MAX 0.40 MIN 0.040 0.040 0.35 MAX 340-441 235 MIN 25
DIN/17175/ST45.8 A/W CS 0.22 MAX 0.45 MIN 0.040 0.040 0.10-0.35 441-540 255 MIN 21

IS 3074 CDS1

A/W CS 0.20 MAX 0.30-0.60 0.050 0.050 -- 432 373 --
IS 3074 CDS2 A/W CS 0.10-0.18 0.40-0.80 0.050 0.050 -- 432 373 --
IS 3074 CDS3 A/W CS 0.10-0.18 0.40-0.80 0.050 0.050 -- 432 373 --
IS 3074 CDS4 A/W CS 0.10-0.18

0.60-0.90

0.050 0.050 -- 569 461 --
IS 3074 CDS5 A/W CS 0.10-0.18 0.60-0.90 0.050 0.050 -- 687 589 --

DIN 2391 PART1 5T-35

-- CS 0.17 >0.04 0.050 0.050 0.35 432 - 5%
DIN 2391 PART1 5T-45 -- CS 0.21 >0.04 0.050 0.050 0.35 540 -- 5%
BS 6323 PART 4 -- CS 0.25 MAX 1.25 MAX 0.050 0.050 0.35 520 415 5%